Per-outlet visibility and control, remotely

Smart PDU

Hyperscale & cloudAI / GPU computeLights-out sitesEdge micro data centers

概要

Per-outlet visibility and control, remotely

The Intelligent iPDU monitors and controls each output individually. Available in four series (A/B/C/D) to match exactly the level of metering and control you need, with an embedded flush-mounted meter (1× LAN, 2× RS485, 1× temp/humidity) for local and remote management.

Rich protocol support — SNMP v1/v2c/v3, Modbus TCP/RTU, HTTP/HTTPS, SSHv2, MQTT and full IPv6 — plus daisy-chaining with metered PDUs to cut cost and equipment size. The controller sits flush with the chassis and hot-swaps for easy maintenance.

見積もりを依頼このPDUをカスタマイズ

Yiestar Smart iPDU range on the showroom wall

このシリーズの理由

主な強み

Per-outlet metering & control

Monitor and switch every branch remotely.

Embedded network meter

1× LAN, 2× RS485, 1× T/H — flush-mounted.

Rich protocols

SNMP, Modbus, MQTT, SSHv2, HTTPS, IPv6.

Hot-swap controller

Replace the control module without downtime.

モデル

Smart PDU シリーズ

代表的な構成です — 各機器はお客様の仕様に合わせてカスタマイズ可能です。

Yiestar Smart iPDU 0U vertical with embedded network meter

Smart PDU0U Vertical · Aluminium 1.25U-width ≥1.5mm

Smart iPDU-A 0U — 36× C13 + 6× C19 (3×32A)

Intelligent PDU with an embedded, flush-mounted three-phase network meter (1× LAN, 2× RS485, 1× T/H) for local & remote monitoring.

相 / 電流: Three Phase · 3 × 32A
アウトレット: 36 × C13 + 6 × C19

見積もりを依頼 →仕様書（PDF）

Yiestar Smart iPDU-BCD series with per-outlet metering and switching

Smart PDU0U Vertical · Aluminium 1.25U-width ≥1.5mm

Smart iPDU-BCD 0U — 30× C13 + 6× C19 Locking (3×32A)

Per-branch monitoring and remote on/off switching with configurable alarm thresholds for proactive risk control.

相 / 電流: Three Phase · 3 × 32A
アウトレット: 30 × C13 locking + 6 × C19 locking

見積もりを依頼 →仕様書（PDF）

Yiestar 1U Smart iPDU with per-outlet control

Smart PDU1U · Horizontal · Steel SGCC ≥1.0mm

Smart iPDU-BCD 1U — 8× GB Locking (16A, SGCC)

Compact 1U intelligent PDU with per-outlet monitoring and switching for enterprise IT closets. C20 inlet.

相 / 電流: Single Phase · 16A
アウトレット: 8 × GB2099 triple-flat 5-pin

見積もりを依頼 →仕様書（PDF）

Selection Guide

Intelligent iPDU — A / B / C / D Series

Every series shares total-circuit and per-phase metering; they differ by per-outlet metering and control.

Yiestar Smart iPDU A/B/C/D series feature comparison
Feature / Function	Type A	Type B	Type C	Type D
Total-circuit metering (V, I, kW, kvar, kVA, PF, kWh, Hz)	Included	Included	Included	Included
Per-phase metering	Included	Included	Included	Included
Per-outlet (branch) metering	—	Included	—	Included
Per-outlet (branch) control	—	Included	Included	—
Metering accuracy ±1% (V/I/P/Energy)	Included	Included	Included	Included
Trip monitoring	Included	Included	Included	Included
Combined temp & humidity sensor	Included	Included	Included	Included
LCD display	Included	Included	Included	Included
RS485 (Modbus) — dual RJ45	Included	Included	Included	Included
Ethernet 10/100 Mbit/s auto-negotiation	Included	Included	Included	Included
USB port	Included	Included	Included	Included
Digital / analog I/O channels (×3)	Included	Included	Included	Included
Expansion sensor module support	Included	Included	Included	Included

All four series share full total-circuit metering, per-phase metering, ±1% accuracy, a combined temp/humidity sensor, LCD, dual RS485 (Modbus) and 10/100 Ethernet. They differ in per-outlet (branch) metering and control.

Supported communication protocols